EZ Lynk Auto Agent 3 DPF Delete Tuner | Ford Powerstroke 3.0L | 2018-2020

Description

The EZ Lynk Auto Agent 3 is a wireless tuning platform for 2018, 2019, and 2020 Ford 3.0L Powerstroke diesel trucks. It provides custom ECU tuning, five SOTF power levels, wireless tune delivery, and vehicle diagnostics through the EZ Lynk platform. The package is designed specifically for the 3.0L Powerstroke and supports the corresponding off-road DPF, EGR, and DEF/SCR configuration.

What’s Included

Vehicle Compatibility

• Years: 2018, 2019, 2020
• Make: Ford
• Model: F-150
• Engine: 3.0L Powerstroke V6 diesel
• Tuning platform: EZ Lynk Auto Agent 3
• Calibration: Custom ECU tuning with SOTF
• Power levels: 0 / +20 / +40 / +60 / +80 HP
• Emissions equipment: DPF, EGR, and DEF/SCR
• Application: Off-road and competition use only

This package fits vehicles equipped with the 3.0L Powerstroke diesel engine. The calibration must match the vehicle configuration and any relevant performance upgrades installed on the truck.

How work?

The 2018, 2019, 2020 3.0 Powerstroke EZ Lynk tuner plugs into the vehicle’s OBD-II diagnostic port and communicates wirelessly with the EZ Lynk platform. Once the vehicle profile is established, the custom calibration is delivered and flashed to the ECU. The tune adjusts the engine and emissions control strategies required for the corresponding off-road DPF, EGR, and DEF/SCR setup. SOTF provides five selectable power positions, allowing the driver to move between stock output and higher-performance settings without installing a different ECU file for each power level.

Features

The Ford 3.0 Powerstroke EZ Lynk Auto Agent 3 tuner combines wireless ECU programming, custom tuning, SOTF, and diagnostic functions in one compact interface. The calibration is designed specifically for the 3.0L Powerstroke rather than adapting a file intended for another diesel platform.

SOTF provides five selectable settings: 0, +20, +40, +60, and +80 HP. This gives the driver a stock-output position and four progressively higher power levels for different driving, load, and performance requirements.

The Auto Agent 3 uses a compatible mobile device as its interface, simplifying tune delivery, installation, and diagnostic access.

Tuning & Settings

The EZ Lynk for 3.0 Powerstroke provides five SOTF power levels:

The five-level setup allows the engine output to be changed without installing a separate calibration each time. The appropriate setting can be selected according to vehicle condition, load, supporting upgrades, and intended use.

Once the calibration is flashed, the Auto Agent 3 does not need to remain permanently connected for the tune to stay installed. It can be connected whenever tuning or diagnostic access is required.

Key Benefits

Five SOTF Power Levels
Choose between stock output, +20, +40, +60, and +80 HP without reflashing the ECU every time the desired power setting changes.

3.0L Powerstroke-Specific Calibration
The tuning package is designed around the 2018-2020 Ford 3.0L diesel platform and its engine management system.

Wireless Tune Installation
Auto Agent 3 communicates with a compatible mobile device, providing a convenient interface for receiving and installing custom tunes.

Integrated Diagnostics
The EZ Lynk platform provides diagnostic functionality alongside tuning, making it easier to access vehicle information and troubleshoot unrelated faults.

Return-to-Stock Capability
The factory calibration can be restored when the truck is returned to its corresponding original hardware configuration.

Installation Information

The EZ Lynk delete tuner for 3.0 Powerstroke connects directly to the truck’s OBD-II diagnostic port, so normal electronic tuning does not require opening or removing the ECU. A compatible mobile device, internet connection, stable battery voltage, and the provided installation instructions are required during setup.

Before programming, verify the vehicle year, engine, drivetrain, tire size, and relevant performance modifications. Accurate vehicle information ensures that the correct custom calibration is installed.

Connect the Auto Agent 3, access the vehicle profile, and follow the required ignition and flashing sequence. Do not interrupt programming or disconnect vehicle power while the ECU is being flashed.